(WOIO) -
Ensure moving panels are securely attached to
the door system. If concerned, consult your instructions or contact the
manufacturer.
Periodically check the shower door hardware
to ensure fasteners remain secure. Tighten them if needed.
Ensure moving glass panel is not directly
contacting the wall or metal during operation. That means checking the panel
alignment and making sure the bumpers and seals are in good condition.
Inspect glass regularly for any chips or
cracks, paying special attention to glass edges, notches, and around holes in
the glass for hardware. If there is any evidence of a crack, replace the
glass panel immediately.
Do not use the shower door towel bars as a
safety grab bar or as a lift assist when getting in and out of the bath, or
lowering and lifting off a toilet.
Copyright 2012 WOIO. All rights reserved.
